How to Root Android using SRS Root Software

1.- Download SRS Root at http://www.srsroot.com or here

2.- Install the app SRS Roott in your PC.

3.- Make sure that this enabled the resources of other platforms are google play. I can look at the following path: Menu > Settings > Unknown sources (ON)

4.- Put your phone on USB Debugging mode (activate checkbox on Settings>Development options>USB debugging or Settings>Applications>Development>USB debugging).

5.- Make sure the Android drivers for your phone are installed in your pc. If not, you can find some drivers in this page.

6.- Connect your device to your PC via USB cable.

7.- Run SRS Root in your PC.

8.- Click on one of the ROOT options in this software, and wait till it’s finished.

9.- If you want to check if you are already root or superuser in your Android phone or tablet you can download HowToRoot app from Google Play Store and click over the padlock in the top-right of the screen. It will show you a message about if your device is rooted or not.

Update Samsung Galaxy Ace Plus S7500 With Gingerbread 2.3.6 ZSLD3

1. Download Odin Multi Downloader For GT-S7500

2. Download Gingerbread 2.3.6 ZSLD3 Package

3. Extract both the files in a particular folder which you’ve just downloaded.

4. Turn off your Phone; Now enter into the Downloading Mode. Downloading Mode can be entered by holding Power Button + Home Button + Volume Down Button simultaneously.

5. After entering your Phone into the Downloading Mode, connect your Phone to the computer. Which you’ve just downloaded in your Computer. By this time ID:COM section should be turned Yellow. If it isn’t then you need to install drivers in your PC by downloading them.

6. Mark PDA; Select the 7500ZSLD3_S7500HKTWLD3_S7500LD3_BRI_HOME.tar.md5 from extracted Gingerbread 2.3.6 ZSLD3.

7. Simply press Start button to initiate the process. Wait for the process to finish.

8. As soon as process will get over, ID:COM section will turn Green giving the Message “Pass“.

9. The whole process of flashing the firmware will take hardly 5-6 minutes. So after getting Pass message your device will be rebooted automatically. Now just switch off it again as we have not completed the whole process.

10. After switching off your device, you need to enter into the Recovery Mode. Recovery Mode can be entered by holding Volume Up + Volume Down + Power Off + Home Button simultaneously (Until Recovery Mode appears).

11. In the Recovery Mode select Wipe Data/Factory Reset and Wipe Cache Partition. Now select “Reboot System Now” from the Recovery Mode itself.

12. Wait until device reboots as it will take some time to restart the device than the usual. As soon as it gets restarted you will land into the Home Screen.

All the best !


www.AndroidLegend.com